- Thermally broken framing with E-Strut™ thermal isolator, improving thermal performance and minimizing condensation
- 2-1/4″ by 4-1/2″ aluminum framing profiles
- Allowance for up to 1-1/8″ glazing or infill panels
- Outside or inside glazed
- Screw-spline or shear-block construction
- Optional sun shade mullions
- Thermally broken framing, improving thermal performance and minimizing condensation
- 2″ by 6-1/2″ aluminum framing profiles
- Allowance for 3/16″ to 1-1/8″ glazing or infill panels
- Outside or inside glazed
- Screw-spline or shear-block construction
- Optional sun shade mullions
- Thermally broken framing, improving thermal performance and minimizing condensation
- 2″ by 4-1/2″ aluminum framing profiles
- Allowance for up to 1-1/8″ glazing or infill panels
- Multiplane, outside or inside glazed
- Screw-spline or shear-block construction
- Optional steel-reinforced mullions
- Outside glazed
- Inside glazed
- 2 or 4-sided structural silicone glazed
- Screw spline construction
- Accommodates up to 1” glazing
- Outside glazed
- 2 or 4-sided structural glazed
- Accommodates up to 1-5/16” glazing
- Concealed shear block construction
- Thermal isolator used between exterior and interior extrusions
- Outside glazed
- Inside glazed
- 2 or 4-sided structural glazed
- Slope glazed
- Screw spline construction
- Concealed shear block construction
- Accommodates up to 1-5/16” glazing
- Outside glazed
- Concealed shear block construction
- Accommodates up to 1-1/4” glazing
- Optional corner mullions
- Outside glazed – captured
- 2 or 4-sided structural glazed
- Splice sleeve for hoisting
- Single or multi-span capacity
- Aluminum and fiberglass pressure plate options
- Available in projected and fixed configurations
- System depth: 3-1/4”
- Sight Lines: 2-27/32″ Head/Hinge Jamb 3-5/32″ Sill (Awning and Casement), 1-1/2″ (Fixed)
- Dry-glazed with heel bead: Can remove glass from building interior
- Integral water management: Any water penetrating past weather-stripping is redirected to building exterior
- Up to 1-3/8” glass thickness: Quieter interior environment
- Customizable perimeter and intermediate grid: Economic grid customization to match existing sightlines
- Tested to AAMA 513: Easier window operation for the elderly and disabled
- Shear block construction
- Screw spline construction
- Accommodates up to 1-1/16” glazing
- Removable face cover
- Projected configuration
- Thermally broken frames
- Nominal 4″ overall depth from face of glass to rear of unit (w/1″ IGU)
- Accommodates 1” glazing
- Structural silicone glazed option
- 2-1/4″ sightline
- Thermally Broken
- Shear block frame construction
- GSA, DoD & VA requirements
- Screw spline construction
- 2-1/4” sight line
- 4-1/2” frame depth
- Dry glazed system
- Accommodates ¼” and 1” glazing
- Thermally broken aluminum framing with dual polyamide strut barriers
- 2″ by 6″ or 7-3/4″ framing profiles
- Allowance for 1″ to 1-1/8″ glazing or infill panels
- Interior and exterior glazing
- Screw-spline construction
- Optional 3″ sightline head starter accommodates vertical interstory movement
- Inside glazed
- 2-1/4” sight line
- 5” frame depth
- Dry glazed system
- Accommodates ¼” and 1” glazing
- Thermally improved framing with a clip thermal barrier
- 1-3/4″ aluminum framing profiles vary in depth from 2-3/4″ to 8-1/8″
- Allowance for 1/4″ to 1-1/16″ exterior glazing or infill panels
- Screw-spline or shear-block construction
- Optional extra-heavy intermediate verticals for high-performance wind load requirements
- Light shelves and sun shades
- Thermally improved mullion attachments
- Finished with curtainwall framing for consistency in color and texture
- Modular design and integral alignment features for ease of installation
- 2-7/8″ frame depth with polyamide thermal barrier
- Divided Lite muntin grids—each lite uses an individual IGU
- Simulated Divided Lites or “simulated grids” available
- Fluted perimeter glazing rebates to match existing putty-glazed windows
- 1 1/16” sightline at thermal barrier muntin
- Custom panning, receptors, sill adaptors, and trim can be designed to accurately match original profiles
- Available with arched, radius, Gothic, and other custom lite patterns for historic compliance
- Supports Section 106, SHPO, and National Park Service (NPS) restoration requirements
- Historic replication engineering using field measurements or archival drawings
- Meets AAMA AW-100 Performance Class
- Reinforced corners and integral mullions
- 2-1/8″ narrow stile
- Accommodates up to 1” glazing
- Bracket reinforced and deep penetration welded corners
- Tall bottom rails available
- 3-1/2″ medium stile
- Accommodates up to 1” glazing
- Bracket reinforced and deep penetration welded corners
- Tall bottom rails available
- Impact-rated with glazing modification