- 3′ by 9′ or 4′ by 8′ single doors with tie-rod construction
- 1-3/4″ by 3-1/2″ vertical stiles and top rail
- 10″ bottom rail for ADA compliance, 6-1/2″ or 7-1/2″ options available
- Allowance for several thicknesses of laminated glazing and laminated IGUs
- A choice of glazing methods, sills, mid-rails and hardware
- 3′ by 9′ or 4′ by 8′ single doors with tie-rod construction
- 1-3/4″ by 5″ vertical stiles and top rail
- 10″ bottom rail for ADA compliance, 6-1/2″ or 7-1/2″ options available
- Allowance for several thicknesses of laminated glazing and laminated IGUs
- A choice of glazing methods, sills, mid-rails and hardware
- Thermally broken framing with single-cavity poured-and-debridged (P&D) thermal barrier
- 2-1/2″ by 5″ aluminum framing profiles
- Allowance for 1-5/16″ laminated glazing or IGUs
- Exterior center-set, flush-glazed
- Wet- or dry-glazed method
- Screw-spline or shear-block construction
- Optional heavy-duty vertical mullions
- Thermally broken aluminum framing
- 2-1/2″ by 7-3/4″ framing profiles
- Allowance for 5/16″ to 1-1/2″ laminated glazing or IGUs
- Outside-glazed system, available in captured and structural silicone-glazed (SSG) configurations
- Shear-block construction
- Fixed configuration
- 3-1/4” frame depth
- Accommodates 1″ glazing
- Variety of panning and interior trim available
- Fixed configuration
- 4-1/2” frame depth
- Accommodates glazing 1” – 1-1/2”
- Exterior snap-in grid
- Variety of panning and interior trim available
- Engineered for large glass sizes, tall floor-to-floor heights, and demanding structural wind loads
- Designed to meet or exceed stringent energy performance requirements and resist condensation for high-humidity applications
- Screw-spline construction
- Dual and triple insulating glass compatibility
- System integration flexibility coordinates with storefront, zero sightline vents, and specialty glazing systems
- Ideal for: high-rise residential, hospitality, healthcare, education, government buildings
- 2″ face width and 4-1/2″ overall depth
- Allowance for 1/2″ glazing as standard
- No need for adaptors for 1/4″ to 3/4″ glazing or infill panel options
- Adaptor options also available for 1/4″ to 3/4″ infill panels
- Black or gray gasket colors
- 90-degree, 180-degree and “T” post mullion/corner options
- 1 3/4″ face width and 4-1/2″ overall depth
- Allowance for 1/4″ glazing as standard
- Additional 5/16″ , 3/8″ and 1/2″ glazing or infill panel options
- Black or gray gasket colors
- 2″ face width and 5-1/2″ overall depth
- Allowance for 1/2″ glazing as standard, with no need for adaptors for 1/4″ to 3/4″ glazing or infill panels
- Black or gray gasket colors
- Options available for knee wall conditions, and for channel head and sill components
- 1-3/4″ thick door leaves with 2-1/8″ width (narrow) stiles
- Allowance for 3/16″ to 1-1/16″ glazing infill options (1″ Std.)
- Front and back “blade” style glass stops
- Tie-rod construction for greater modification flexibility
- Pocketed, one way stacked and biparting leaf configurations possible
- Offers several head channel and floor track options to accommodate numerous door leaf combinations and flooring conditions such as:
- Combinations of up to 5 leaves one-way stacked configurations and corresponding surface mount/recessed track options available
- Multiple bottom rail heights both single rail and stacked options are available offering heights from 3-1/2″ up to 10″ single rail and 12″ (stacked dual 6″ rail) configurations
- Hardware options such as flush finger pulls, pocket edge pulls, hook bolts, mortise cylinders, and thumbturns are all available for application to the INT810 sliders
- 3-11/16”, 4-11/16”, and 5-11/16” frame depth with 44mm polyamide thermal barrier and foam cavity fillers
- Composite frame construction for enhanced thermal performance
- Whole window NFRC U-Factors as low as 0.18
- AAMA AW-100 Architectural Performance Class
- Supports dual or triple insulating glass
- Narrow sightlines and clean, modern profiles
- Fixed, casement, awning, and hopper configurations
- Compatible with panning, receptors, anchors and accessories
- Optional between-glass blinds and muntin grids
- High condensation resistance and acoustic performance
- Historic-style profiles: beveled, cove, ogee, or square glazing stops
- Multiple frame depths: 2 7/8″, 3 7/8″, 4 7/8″
- AAMA AW-100 Architectural Performance Class
- Fixed, casement, awning, or hopper operability
- True-divided, tape-applied, or between-glass muntin grids
- Dual or triple insulating glass options
- Flush-vent operable design for clean aesthetics
- Ideal for historic preservation, institutional, campus, and adaptive reuse projects
- AAMA AW-100 Performance Class
- Polyamide thermal barrier technology
- Multiple frame depths (2½″, 3½″, 4½″)
- Dual or triple glazing for enhanced thermal and acoustic performance
- Integral venetian blinds available with hinged or lift-out access panels
- Broad operability portfolio: fixed, outswing or inswing casement, and projected awning and hopper configurations
- Seamless integration into punched openings or window wall
- Ideal for renovation or retrofit
- Engineered for durability
- 2 7/8”, 3 7/8” and 4 7/8” frame depth with extra-wide polyamide thermal barrier
- AAMA AW-100 Performance Class
- Fixed, project-out awning, project-in hopper, or inswing & outswing casement
- Flush vent construction reduces collection of dust and debris
- 4250i-XLT simulated double hung option
- Dual or triple glazed option with hinged or lift-out access panels
- 5/8” or 1” between-glass Venetian blinds available
- Slide-in heavy duty steel anchors
- 1/8” principal wall thickness
- Multi-lock hardware option for improved accessibility
- Head, sill and jamb receptors available
- Broad selection of renovation panning
- Up to 84″ spans at 65 psf
- 5″ airfoil-shaped, multiblade profile – 3 to 6 blades depending on depth
- Straight outrigger in 20″, 25″, 30″ and 35″ depths
- Up to 96″ spans unspliced, or up to 149″ spans spliced
- 6″ or 9″ airfoil-shaped, single, horizontal blade
- Two-piece mounting bracket
- Up to 142″ spans at 65 psf
- 2-3/4″-diameter, round, multiblade profile – 3 to 6 blades depending on depth
- Curved outrigger in 20″, 25″, 30″ and 35″ depths
- Tubular-shaped fascia style
- Up to 56″ spans at 65 psf
- 5-1/4″ Z-shaped, multiblade profile – 3 to 6 blades depending on depth
- Straight outrigger in 20″, 25″, 30″ and 35″ depths
- Box-Shaped fascia style
- 4′ by 9′ single doors with tie-rod construction
- 2″ by 3 1/2″ vertical stiles and top rail
- 6″ bottom rail with a 10″ option for ADA compliance, other options available
- Optional intermediate horizontal or vertical mid-rails and double doors up to 10′ high with engineering approval
- Allowance for 3/16″ to 1″ glazing or infill panels