- 4′ by 9′ single doors with tie-rod construction
- 2″ by 3″ vertical stiles and top rail
- 6″ bottom rail with a 10″ option for ADA compliance
- Optional intermediate horizontal or vertical mid-rails and double doors up to 10′ high with engineering approval
- Allowance for 3/16″ to 1″ glazing or infill panels
- 4′ by 9′ single doors with tie-rod construction
- 2″ by 5″ vertical stiles and top rail
- 6″ bottom rail with a 10″ option for ADA compliance
- Optional intermediate horizontal or vertical mid-rails and double doors up to 10′ high with engineering approval
- Allowance for 3/16″ to 1″ glazing or infill panels
- Interior/Exterior EPDM gasket/seals/thermal separation
- 3-1/2″ (88.9mm) aluminum frame depth for dual-glazed IGUs
- mitered and sealed corners, crimped to “L”-shaped clips for structural integrity
- two-color finish capability for interior and exterior surfaces
- maximum vent size up to 36-1/4″ x 60-1/4″ (921mm x 1530mm) with Euro multi-point lock (MPL)
- Interior/Exterior EPDM gasket/seals/thermal separation
- AAMA AW85 PG
- Sizes up to 78″ by 49″ and 37″ by 78″
- 4-1/4″ (82.55mm) aluminum frame depth with 1-3/4″ interior face width
- Allowance for 1″ dual-glazed IGUs
- A choice of hinges, handles, locks, screens and other hardware
- Factory-fabricated, multichambered rain screen, pressure-equalized design
- Projected or fixed configuration
- Vertical or horizontal stacking members
- Dual glazing with optional integral blinds
- Angle reinforced vent covers
- Wide variety of locking and operating hardware available
- Accessory line of subframes, mullions, and architectural sills
- Screen frames of extruded aluminum alloy available
- ADA accessibility with project out, outswing and inswing
- 4′ by 9′ single doors with tie-rod construction
- 1-3/4″ by 3-1/2″ vertical stiles and top rail
- 6-1/2″ bottom rail with a 10″ option for ADA compliance
- Optional intermediate horizontal or vertical mid-rails and double doors up to 10′ high with engineering approval
- Allowance for 3/16″ to 1″ glazing or infill panels
- 4′ by 9′ single doors with tie-rod construction
- 1-3/4″ by 2-1/8″ vertical stiles and top rail
- 4″ bottom rail with a 10″ option for ADA compliance
- Optional intermediate horizontal or vertical mid-rails and double doors up to 10′ high with engineering approval
- Allowance for 3/16″ to 1″ glazing or infill panels
- 4′ by 9′ single doors with tie-rod construction
- 1-3/4″ by 5″ vertical stiles and top rail
- 6-1/2″ bottom rail with a 10″ option for ADA compliance, other options available
- Optional intermediate horizontal or vertical mid-rails and double doors up to 10′ high with engineering approval
- Allowance for 3/16″ to 1″ glazing or infill panels
- 4-3/4″, 6 1/4”, 7 1/4”, 8 1/4” or 10 1/4” frame depths
- 2 1/2” or 3” exterior sight line – Many accent covers available
- Proven pressure-plate system designed for field glazing
- Captured or two-side structural glazed
- Splayed mullions available for segmented radii
- Screw-spline construction
- “F” and “T” perimeter anchors
- Zero sight line vents available
- Available with interior access doors and between-glass blinds
- Exterior sun shades and interior light shelves available
- NFRC and Component Modeling Approach (CMA) listed
- Four-Sided Structural Silicone Glazing (SSG)
- 5-1/4″, 6-3/4”, 7-3/4”, 8-3/4”, or 10-3/4” total system depth (with standard 1” glass)
- All grid framing is interchangeable with standard Wausau SuperWall systems
- No exterior exposed framing
- Field face-sealed
- “F” and “T” perimeter anchors
- Exterior accent trim available
- Zero sightline vent inserts
- Exterior sun shades and interior light shelves available
- Narrow 2-1/2″ mullions maximize daylight opening
- Thermally broken framing with single-cavity poured-and-debridged (P&D) thermal barrier
- 2″ by 4-1/2″ aluminum framing profiles
- Allowance for 1/4″ to 1-1/8″ exterior glazing or infill panels
- Multiplane options (Inboard and Outboard plane), Inside or Outside flush-glazed options
- Screw-spline or shear-block construction
- Thermally broken framing with single-cavity poured-and-debridged (P&D) thermal barrier
- 2″ by 4-1/2″ aluminum framing profiles
- Allowance for 1/4″ to 1-1/8″ exterior glazing or infill panels
- Center-set, outside or inside flush-glazed
- Screw-spline or shear-block construction
- 2-1/8″ narrow stile
- Accommodates up to 1″ glazing
- Tie-rod construction
- Telescoping corner joints
- Thermally broken framing with single-cavity poured-and-debridged (P&D) thermal barrier
- 2″ by 6-1/2″ aluminum framing profiles
- Allowance for 1/4″ to 1-1/8″ exterior glazing or infill panels
- Center-set, outside or inside flush-glazed
- Screw-spline or shear-block construction
- 3-1/2″ medium stile
- Accommodates up to 1″ glazing
- Telescoping corner joints
- Tie-rod construction
- Telescoping corner joints
- 3.25″ frame depth
- E-Strut thermal isolator
- Accommodates up to 1-1/4” glazing
- Two custom aluminum extruded hinges on each door leaf
- 1/2″ tall threshold available
- 3.5″ frame depth
- E-strut thermal isolator
- Accommodates up to 1-1/4” glazing
- Two custom aluminum extruded hinges on each door leaf
- 1/2” tall threshold available
- 4.5″ frame depth
- E-Strut thermal isolator
- Accommodates up to 1-1/4” glazing
- Two custom aluminum extruded hinges on each door leaf
- 1/2″ tall threshold available
- 5″ wide stile
- Accommodates up to 1″ glazing
- Tie-rod construction
- Telescoping corner joints
- 4-1/2″ frame depth with polyamide thermal barrier
- AAMA AW50 to AW60 performance class
- In-swing or out-swing operation
- Sturdy corner-blocked and crimped door-leaf construction
- Multi-point locking with Verona-style Euro handle
- Low-profile sill options / Improved-access sill threshold
- Forced-entry resistance tested