- Thermally broken framing with an insulating polyamide barrier that improves thermal performance and helps prevent condensation
- 4′ by 8′ single doors with tie-rod construction
- 1-3/4″ by 4″ vertical stiles and top rail
- 10″ bottom rail for ADA compliance, other options available (see perimeter sheet)
- Optional intermediate horizontal or vertical mid-rails and double doors up to 9′ high with engineering approval
- Allowance for 3/16″ to 1″ glazing or infill panels
- Thermally broken framing with an insulating polyamide barrier that improves thermal performance and helps prevent condensation
- 4′ by 8′ single doors with tie-rod construction
- 1-3/4″ by 2-1/2″ vertical stiles and top rail
- 10″ bottom rail for ADA compliance, other options available (see perimeter sheet)
- Optional intermediate horizontal or vertical mid-rails and double doors up to 9′ high with engineering approval
- Allowance for 3/16″ to 1″ glazing or infill panels
- Thermally broken framing with an insulating polyamide barrier that improves thermal performance and helps prevent condensation
- 4′ by 8′ single doors with tie-rod construction
- 1-3/4″ by 5″ vertical stiles and top rail
- 10″ bottom rail for ADA compliance, other options available (see perimeter sheet)
- Optional intermediate horizontal or vertical mid-rails and double doors up to 9′ high with engineering approval
- Allowance for 3/16″ to 1″ glazing or infill panels
- 2″ Sight line
- 4-1/2″ Depth
- Inside and outside plane glass
- Dual poured and debridged thermal break
- Infill: 1″ typ (1/4″ – 1-1/8″)
- #12 Screw Construction
- Thermally broken framing with dual-cavity poured-and-debridged (P&D) ultra-thermal barrier that improves thermal performance and helps prevent condensation
- 2″ by 4-1/2″ aluminum framing profiles
- Allowance for 1/4″ to 1-1/8″ exterior glazing or infill panels
- Center-set, outside or inside flush-glazed
- Screw-spline or shear-block construction
- Thermally broken framing with dual-cavity poured-and-debridged (P&D) ultra-thermal barrier that improves thermal performance and helps prevent condensation
- 2″ by 6-1/2″ aluminum framing profiles
- Allowance for 1/4″ to 1-1/8″ exterior glazing or infill panels
- Front-set, outside or inside flush-glazed
- Screw-spline or shear-block construction
- Thermally broken framing with insulating polyamide thermal barrier
- AAMA CW70 PG
- Sizes up to 66″ by 36″
- 2-11/16″ aluminum frame depth with 2-9/16″ face width
- Allowance for 1″ and 1-1/16″ dual-glazed IGUs
- A choice of hinges, handles, locks, screens and other hardware
- Factory-fabricated, sealed and crimped joinery with mitered sash and frame corners
- Thermally broken framing with insulating polyamide thermal barrier
- AAMA AW80 PG
- Sizes up to 66″ by 36″
- 2-11/16″ aluminum frame depth with 2-9/16″ face width
- Allowance for 1″ to 1-1/16″ dual-glazed IGUs
- A choice of hinges, handles, locks, screens and other hardware
- Factory-fabricated, sealed and crimped joinery with mitered sash and frame corners
- 1-3/4″ Sight line
- 3-1/2″ to 6-5/8″ Depths
- Front or center plane glass
- Thermal clip – high performance
- Infill: 1″ typ (1/4″)
- Projected configuration
- Thermally broken frames
- Accommodates 1/4″ to 1” glazing (1-1/8″ pocket)
- Structural silicone glazed option
- Mullion aligns with adjacent storefront horizontals
- Aluminum Screens available
- Thermally broken framing with insulating thermal barrier
- 3-1/2″ aluminum frame depth with 2-1/8″ face width
- Allowance for 1/4″ monolithic glazing or 1″ dual-glazed IGUs
- A choice of hinges, handles, locks, screens and other hardware
- Field-glazed, structural silicone-glazed (SSG) system
- Anodized & painted finishes available
- Projected and fixed configurations
- Thermally broken framing with insulating thermal barrier
- 2″ aluminum frame depth with 3-3/16″ face width (project-out) 2-1/4″ (fixed)
- Allowance for 1″ monolithic glazing or dual-glazed IGUs
- A choice of subframes, mullions, screens, sills and other hardware
- Factory-fabricated, pre-glazed units with pressure-equalized design
- Aluminum frame construction with mitered and angle-reinforced window corners
- Thermally broken framing with insulating thermal barrier
- AAMA AW120 PG
- 3-1/4″ aluminum frame depth with 2″ face width
- Allowance for 1-5/16″ dual-glazed IGUs
- A choice of subframes, mullions, screens, sills, optional snap-in muntin grids and other hardware
- Factory-fabricated, pre-glazed units with pressure-equalized design
- Screw-spline frame construction with angle-reinforced, back-sealed window corners
- 321G version accepts “snap in grids“
- 2-1/2″ by 5″ aluminum framing profiles
- Allowance for 7/16″ to 5/8″ laminated glazing or infill panels
- Outside dry-glazed / inside wet-glazed
- Screw-spline or shear-block construction
- Optional sun shade mullions
- Thermally broken framing with poured-and-debridged (p&D) thermal barrier, improving thermal performance and minimizing condensation
- 2-1/2″ by 5″ aluminum framing profiles
- Allowance for 1-5/16″ laminated glazing or IGUs
- Outside or inside glazed, wet or dry
- Screw-spline or shear-block construction
- Optional sun shade mullions
- Outside glazed
- 2 or 4-sided structural glazed
- Accommodates up to 1-5/16” glazing
- Concealed shear block construction
- Impact-rated
- Outside glazed
- Inside glazed
- 2 or 4-sided structural glazed
- Slope glazed
- Screw spline construction
- Concealed shear block construction
- Accommodates up to 1-5/16” glazing
- 5″ frame depth
- Accommodates up to 1-3/16” glazing
- Tested for small and large missile impact testing
- Minimized and streamlined sightlines
- 5″ frame depth
- Accommodate glazing up to 1-3/16” thick
- Tested for small and large missile impact testing
- Minimized and streamlined sightlines
- 3-7/8” frame depth
- Thermally isolated system
- Accommodates glazing of 9/16”, 1”, 1-3/16”
- Impact-rated