- Fixed configuration
- Thermally broken framing and sash with insulating thermal barrier
- 3-7/8″ aluminum frame depth with 2-1/4″ face width
- Allowance for up to 1-1/18″ monolithic glazing or double-glazed IGUs
- A choice of locks, optional muntin grids and other hardware
- Factory-fabricated, pre-glazed units with screw-spline construction and continuous interlock meeting rails
- 6621G version accepts “snap in grids“
- Single hung configuration
- Thermally broken framing and sash with insulating thermal barrier
- 3-7/8″ aluminum frame depth with 3-3/4″ face width (at jambs)
- Allowance for 9/16″ monolithic glazing up to 1/18″ double-glazed IGUs
- A choice of of balance systems, locks, screens, optional muntin grids and other hardware
- Factory-fabricated, pre-glazed units with screw-spline construction and continuous interlock meeting rails
- 663G version accepts “snap in grids“
- 3.5″ frame depth
- E-Strut thermal isolator
- Two custom aluminum extruded hinges on each door leaf
- Mitered corner construction of each door leaf and multipoint locking hardware
- 4.5″ frame depth
- E-strut thermal isolator
- Two custom aluminum extruded hinges on each door leaf
- Mitered corner construction on each door leaf and multipoint locking hardware
- Projected or fixed configuration
- Vertical or horizontal stacking members
- Dual glazing with optional integral blinds
- Angle reinforced vent covers
- Screen frames of extruded aluminum alloy available
- ADA accessibility with project out, outswing and inswing
- Thermally broken framing with dual-cavity poured-and-debridged (P&D) ultra-thermal barrier, improving thermal performance and minimizing condensation
- 2″ by 4-1/2″ aluminum framing profiles
- Allowance for up to 1-1/8″ glazing or infill panels
- Outside or inside flush-glazed
- Screw-spline or shear-block construction
- Wide range of angled mullions
- Optional sun shade mullions, variable sightline horizontals and steel reinforcement
- Thermally broken framing with dual-cavity poured-and-debridged (P&D) ultra-thermal barrier, improving thermal performance and minimizing condensation
- 2″ by 6-1/2″ aluminum framing profiles
- Allowance for up to 1-1/8″ glazing or infill panels
- Outside or inside flush-glazed
- Screw-spline or shear-block construction
- Wide range of angled mullions
- Optional sun shade mullions
- 4-1/2” frame depth
- Fixed and projected configurations
- Angle reinforced vent corners
- Dual glazing with optional integral blinds available
- 450G version accepts “snap in grids“
- Outside glazed
- 2 structural silicone glazed
- 7” and 8” mullion depth available
- Accommodates up to 2-1/4” glazing
- Screw spline construction
- Outside glazed
- 2 or 4-sided structural glazed
- Accommodates up to 1-5/8” glazing
- Concealed shear block construction
- Thermal isolator used between exterior and interior extrusions
- Outside glazed
- 2 or 4-sided structural glazed
- Accommodates up to 1-5/16” glazing
- Concealed shear block construction
- Thermal isolator used between exterior and interior extrusions
- Designed for EFCO curtain wall and storefront systems
- Components fabricated from 6063-T6 aluminum
- Anodized and painted finishes available
- Screw spline construction
- Sunshade “Arms” available in (5) standard lengths: 20″, 24″, 28″,32″ and 36″.
- Sunshade “Blades” available in seven standard shapes: 2 1/2″ deep to 4″ deep by 3/4″ wide.
- Sunshade components fabricated from 6063-T6 aluminum
- Sunshade Clip and Arm are fabricated on CNC machine
- Screw spline construction
- Sunshade designed specifically for EFCO curtain wall systems
- Anodized and painted finishes available
- Single hung configuration
- Thermally broken framing and sash with insulating thermal barrier
- AAMA AW50PG
- 3-1/4″ aluminum frame depth with 3-1/2″ face width (jambs), 1-3/4″ (head), 4-13/64″ (sill)
- Allowance for up to 1″ double-glazed IGUs
- Optional panning, between-glass muntins, subframes, mullions, sills and other hardware
- Factory-fabricated, pre-glazed units
- 4-1/2” frame depth
- Double hung configuration
- Dual glazing with optional integral blinds available
- Accommodates 1″ glazing w/grid sash, 1-1/2” glazing w/non-grid sash
- Thermally broken framing with insulating thermal barrier
- 4-1/2″ aluminum frame depth with 3-1/16″ face width
- Allowance for 1-1/2″ dual- and triple-glazed IGUs
- Pre-glazed and available in numerous configurations
- U-Factor w/EFCO stock glass: 0.34
- HD (Heavy Duty) meeting rail detail for increased AW rated window